Tall & Mini Cassette Carts

All carts and racks are ideal for holding and temporary storage of cassettes, boxes of film, caddies, jackets, etc. All steel construction with baked enamel finish. All units have rubber mat inside each compartment. Space saving carts have sturdy 4" (102mm) plate casters. Carts have padded bar-style handles and scuff resistant tops. CRM-38 has six 8" wide compartments @ 17-3/4" vertical clearance. 

 

CRM-38 $ 525.00 (24"x18"x50")

 

 

Stationary version of the CRM-38 cart (no casters).

 

CRR-37 $ 475.00 (24"x18"x50")

 

Four 6" wide x 16" x 16" compartments @ 15-3/4" vertical clearance. Shipped via motor freight. 

 

CRM-24 $ 525.00 (24"x16"x36")

 

 

Keeps cassettes clean and organized in four compartments. Ideal for limited space. Accommodates cassette sizes: 8"x10" up to 14"x17". Major unit dimensions: 21"w x 39"h x 6" front to back. 

 

 

CRU-20 $ 399.00 (24"Wx39"Hx9"D)

 

All Steel construction. Mounts to wall or other suitable surface. Rubber mat on shelf. Vinyl edging on dividers to protect cassettes. 

 

MCH-20 $ 150.00 (11"Wx9"Hx7 1/4"D)

 

Unibody construction make our Slim-Line Carts an open transporter with high visibility of film, cassettes, and jackets. All Slim-Lines are designed for cassettes, folders, caddies & film. Slanted shelves with impact resistant stainless steel edges. Extra heavy 14 gauge steel, all welded construction. Rubber mat in each compartment & protected wear points. Large 5" (127mm) plate casters (two are locking). Rubber corner bumpers and dual padded handles. SL-1 has an open top. Two tier. Two dividers per shelf/ 6-1/2" centers. Lower shelf @ 15-3/4" vertical clearance. Nominal size: 20"w x 17"d x 41"h. 

 

SL-1 $560.00

SL-2 has a shelf top. Two tier. Two dividers per shelf/ 6-1/2" centers. Lower shelf @ 15-3/4" vertical clearance, top shelf has 15" vertical clearance. Nominal size: 20"w x 17"d x 41"h. 

 

SL-2 $595.00

SL-3 has an open top. Three tier. Four dividers per shelf/ 4" centers. Lower shelves @ 15-3/4" vertical clearance. Nominal size: 20"w x 17"d x 49"h. Shipped via motor freight. 

 

SL-3 $ 785.00

 

SL-4 has an open top. Two tier. No dividers. Lower shelf @ 15-3/4" vertical clearance. Nominal size: 20"w x 17"d x 41"h. Shipped via motor freight. 

 

 

SL-4 $ 535.00

 

Transporter

Big Wheels with lots of storage make our Heavy Duty Carts the ideal choice for moving files over carpet, driveways, and elevator thresholds. All Transporters will withstand elevators and rugged terrain. All steel construction with baked enamel finish. 8" (203mm) heavy duty wheels / 5" (127mm) industrial casters. Easy movement of heavy film and cassette loads. Padded bar-style handles. Assembled and ready for years of use. HD-838 has 102 linear filing inches (2590mm). Overall dimensions (with wheels and handles): 46"x23"x57"h. Each compartment @ 14-7/8" vertical clearance x 6" x 18". 

HD-838 $ 920.00 (35"x18"x57")

Transporter

38 linear filing inches (960mm). Overall dimensions (with wheels and handle): 34"x23"x36"h. Two upper bins @ 14" deep x 9" x 24". Four lower compartments @ 14-3/4" vertical clearance x 6" x 18". Shipped via motor freight. 

HD-460 $ 615.00 (24"x18"x36")

 

Transporter

92 linear filing inches (2337mm). Overall dimensions (with wheels and handle): 58"x29"x37"h. Eight upper bins @ 12" deep x 6" x 24". Eight lower compartments @ 14-3/4" vertical clearance x 6" x 24". 

 

HD-515 $ 930.00 (48"x24"x37")

Transporter Cover

All weather protection for "cross-country" transportation. Rugged nylon-reinforced vinyl cover. Custom made to fit each specific transporter.

HDC-46 $ 105.00 (fits HD-460) HDC-51 $ 105.00 (fits HD-515) HDC-83 $ 105.00 (fits HD-838)

Active Film Cart

Top Loading Carts are our most popular, all purpose, medium duty carts. Reinforced wear points. All steel construction with baked enamel finish. NOT recommended for routine elevator use. Sturdy 4" (102mm) plate casters: two stationary, two swivel. Padded bar-style handle and rubber corner bumpers. Rubber mat inside each compartment. 41AC has four compartments. Each is 6"x24"x12" deep. 

 

41AC $ 525.00 (24"x24"x36")

Film and Cassette Cart

Two compartments. Each is 8"x24"x14" deep. 

 

46AC $ 525.00 (24"x16"x36")

 

Jumbo Active Film Cart

For oversize loads. Eight compartments. Each is 6"x24"x12" deep. 

40AC $ 710.00 (48"x24"x36")

Short Reading Cart

 

Ideal for use while seated. Two compartments. Each is 8"x24"x14" deep. Shipped via motor freight. 

47AC $ 525.00 (24"x16"x28")

 

 

Cassette/Film Cart

Side Loading Carts enhance file room efficiency and organization with flexible applications. (Available with doors!) All steel construction with baked enamel finish. Sturdy 4" (102mm) plate casters: two stationary, two swivel. Padded bar-style handle and scuff resistant top. Rubber mat inside each compartment. Cassette/Film Cart has six 6"wide compartments on the top shelf @ 14-7/8" vertical clearance. Lower shelf is modified to accept 14"x17" cassettes. 

412C $ 569.00 (36"x18"x40")

Multi-Viewer Cart

 

Designed for quick retrieval and review of film. Twelve 4-1/2" wide compartments @ 15-3/8" vertical clearance. One 18" wide compartment.

411MV $ 679.00 (36"x18"x40")

Multi-Viewer Cart

Designed for quick retrieval and review of film. Sixteen 4-1/2" wide compartments (eight per shelf) @ 15-3/8" vertical clearance. No single wide compartment. 

415MV $ 695.00 (36"x18"x40")

Side Loading Carts with Doors

 

Three of our best selling Side Loading Carts are now available with doors for mobile security and convenience. Flush mounted paddle handles. Locks offer additional security. Heavy duty construction.

DR412C $ 799.00 DR411MV $ 940.00 DR415MV $ 955.00

These carts are designed especially for medical records and mammography film and similar sized documents. All steel construction with baked enamel finish. Sturdy 4" (102mm) plate casters: two stationary, two swivel. Padded bar-style handle and scuff resistant top. 9-7/8" (251mm) vertical height clearance per shelf. MRS-15 is Single entry (one side). Fifteen 7" wide compartments. 15" shelf depth (front to back). 

MRS-15 $ 680.00 (38"x15"x40")

MRD-25 is double entry (both sides are independent of each other). Thirty 7" wide compartments (fifteen per side). 12-1/2" shelf depth (front to back).

 

MRD-25 $ 785.00 (38"x25"x40")